Synthesis and characterization of siloxane poly(urethane-urea)s for cardiovascular applications

作者
Loshini S. Dandeniyage
出处
期刊:RMIT University Library - RMIT Research Repository [RMIT University]
标识
DOI:10.25439/rmt.27580383
摘要

Currently there are two types of synthetic heart valves, mechanical and bioprosthetic, each with certain disadvantages. The mechanical valve requires the patient to take anticoagulation drugs regularly and the durability of the bioprosthetic valve is relatively poor. A synthetic heart valve with better durability and biocompatibility is required to overcome the deficiencies of existing valves. Polyurethanes (PU) have been investigated in cardiovascular applications due to their exceptional biocompatibility, stability, and mechanical performance. Elast-EonTM 2A is a siloxane-based PU developed by CSIRO and commercialized by St. Jude medical (Abbott) for cardiac pacemaker lead insulations. Over 4 million pacemaker leads have been implanted in patients globally since it was introduced in 2006 and there is no reported insulation failure. Although mechanical properties of Elast-EonTM 2A are suitable for a range of medical implants, materials for synthetic heart valves require high tensile strength, high tear strength and low cyclic creep for long term performance. Therefore, this study was aimed at developing a superior material with suitable mechanical properties and biostability for synthetic heart valve applications and understanding their structure-property-biostability relationship. PU are comprised of non-polar soft segment and polar hard segment bonded chemically in alternating sequence. Mechanical properties of PU are influenced by phase separation between soft and hard segments triggered by their incompatibility. This study proceeded by hypothesising that introduction of polar functionality into the soft segment can improve the compatibility with relatively polar hard segment. This improved compatibility would then improve the creep resistance, tensile and tear strengths, while retaining long-term biostability. At the first stage of this study, a series of linked-macrodiols was synthesised by linking poly(hexamethylene oxide) (PHMO) and α,ω-bis(6-hydroxyethoxypropyl) poly(dimethylsiloxane) (PDMS) individually with different diisocyanates. Incorporation of diisocyanate in the soft segment increases the polarity and hence improve the compatibility with the hard segment. 4,4’-methylenediphenyl diisocyanate (MDI), isophorone diisocyanate (IPDI) and hexamethylene diisocyanate (HDI) were used to link macrodiols. Those linked macrodiols were used in synthesising a series of mixed macrodiol based siloxane poly(urethaneurea)s (SiPUU). The hard segment was composed of MDI, and a 1:1 mixture of 1,3-bis(4-hydroxybutyl)-1,1,3,3-etramethyldisiloxane (BHTD) and 1,2-ethylenediamine (EDA). It was xxi found that the linking of PHMO with MDI and IPDI produced SiPUU with higher creep resistance and higher tensile and tear strengths compared to Elast-EonTM 2A. These SiPUU were characterized using a suit of analytical methods including Fourier transform infrared spectroscopy, gel permeation chromatography, differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, X-ray photoelectron spectroscopy, atomic force microscope, small and wide-angle X-ray scattering. The urethane linkages introduced to the soft segment by linking PHMO with MDI and IPDI formed stronger hydrogen bonds with urethane and urea linkages in the hard segment compared to that in Elast-EonTM 2A. These strong interactions enhanced the compatibility between soft and hard segments resulting in improved mechanical properties. Furthermore, PHMO-MDI-PHMO and PHMO-IPDI-PHMO linked macrodiols contributed to the mixedphase of SiPUU together with end groups of PDMS and some parts of hard segment. The linking of PHMO with MDI or IPDI reinforced this interface between soft and hard segments giving rise to better mechanical properties on the resultant SiPUU. All the SiPUU were noncytotoxic and showed siloxane-rich hydrophobic surfaces with negligible water uptake (0.7%/dry mass). Oxidative stability of two SiPUU synthesised with PHMO-MDI-PHMO and PHMOIPDI-PHMO linked macrodiols was evaluated by using accelerated in vitro oxidative method with 20% H2O2 and 0.1 mol/L CoCl2 solution which simulated the environment of human body. Evaluation of molecular weight, physical and chemical properties of these two materials after the oxidative treatment showed similar degree of resistance to environmental stress cracking (ESC) compared with Elast EonTM 2A. However, they showed improved resistance to ESC compared to polyether-PU. This study confirmed that the chemical modification in the soft segment did not affect the oxidative stability of SiPUU while retaining their high mechanical performance and long-term stability. Another series of SiPUU was synthesised by varying EDA:BHTD ratio. The optimum content of chain extender composition in the hard segment was found to be in the range of 40 to 60-mol% BHTD in terms of higher mechanical properties. The soft segment of this series was comprised of PDMS and PHMO-MDI-PHMO linked macrodiol. This formulation produced SiPUU with high tear and tensile strengths, low modulus, high elongation and good oxidative stability. This study provides the underpinning science together with optimised process protocols to design and synthesise SiPUU with high mechanical properties and good biostability for cardiovascular applications. Furthermore, this study provides greater insights on the structureproperty-biostability relationship of the synthesised SiPUU. Thus, this study has advanced the science of producing SiPUU polymers which have superior mechanical and biostability performance than those available commercially for heart valve leaflets. The science and technological process developed in this study can also be applied to formulate polymers suitable for other medical devices.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
刚刚
zhaoben发布了新的文献求助10
刚刚
TaoJ举报小唐的求助涉嫌违规
刚刚
1秒前
桐桐的应助被叫你吃布丁采纳,获得10
3秒前
5秒前
wwwww发布了新的文献求助10
5秒前
Akim的应助被huoyunli采纳,获得30
5秒前
6秒前
6秒前
Maestro_S的应助被许右采纳,获得10
6秒前
Ren的应助被daomaihu采纳,获得100
6秒前
Ren的应助被daomaihu采纳,获得100
7秒前
Ren的应助被daomaihu采纳,获得100
7秒前
DW的应助被小SCI采纳,获得10
7秒前
烟花的应助被板凳饭团采纳,获得10
8秒前
alex发布了新的文献求助30
10秒前
阳利发布了新的文献求助10
10秒前
郑睿涛发布了新的文献求助10
11秒前
PMY完成签到,获得积分10
11秒前
Orange的应助被章鱼采纳,获得10
11秒前
12秒前
贪玩果汁发布了新的文献求助10
13秒前
13秒前
13秒前
wwwww完成签到,获得积分10
14秒前
tourist585发布了新的文献求助10
14秒前
乐乐的应助被qingxingzhou采纳,获得10
14秒前
酱紫完成签到 ,获得积分10
15秒前
18秒前
深情安青的应助被Xinghe1228采纳,获得30
18秒前
从未停步发布了新的文献求助20
19秒前
19秒前
完美世界的应助被叫你吃布丁采纳,获得10
19秒前
平静椰子完成签到,获得积分10
19秒前
wei发布了新的文献求助10
19秒前
greenandblue完成签到,获得积分10
20秒前
科研通AI2S的应助被花花采纳,获得10
20秒前
20秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Improving the wear resistance of vehicle gear oil by oil soluble LaF3 nanoparticles and typical additives of gear oil 500
Boundaries and Bodhisattvas 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8183730
求助须知:如何正确求助?哪些是违规求助? 9572975
关于积分的说明 21828453
捐赠科研通 7780887
什么是DOI,文献DOI怎么找? 3434086
关于科研通互助平台的介绍 2558276
邀请新用户注册赠送积分活动 2480557