共晶体系
材料科学
层状结构
微观结构
成核
定向凝固
相(物质)
光学
折射率
平面的
复合材料
光电子学
热力学
物理
计算机图形学(图像)
有机化学
化学
计算机科学
作者
Jae‐Won Choi,Ashish A. Kulkarni,Erik Hanson,Daniel Bacon‐Brown,Katsuyo Thornton,Paul V. Braun
标识
DOI:10.1002/adom.201701316
摘要
Abstract Directional solidification of a eutectic melt allows control over the resultant eutectic microstructure, which in turn impacts both the mechanical and optical properties of the material. These self‐organized phase‐separated eutectic materials can be tuned to have periodicities from tens of micrometers down to nanometers. Furthermore, the two phases possess differences in their refractive index leading to interesting optical properties that can be tailored within the visible to infrared wavelength regime. It is found the binary salt eutectic AgCl–CsAgCl 2 system forms a rod microstructure with sample draw rates up to 0.2 mm s −1 which transitions to a lamellar microstructure at draw rates greater than 0.36 mm s −1 . Heat‐transfer simulations reveal a draw rate‐dependent direction of motion of the solidification front, which for a range of draw rates requires nucleation of the minority solid phase at the sample wall. Phase‐field modeling indicates that the initial eutectic structure at the sample boundary, either rod or lamellar, dictates the bulk eutectic morphology. These samples contain submicrometer periodicities which coupled with their optical transparency results in them exhibiting draw rate‐dependent near‐IR reflectance peaks consistent with stop bands for 2D hexagonal (rod) and 1D planar (lamellar) photonic crystals.
科研通智能强力驱动
Strongly Powered by AbleSci AI