Multiple charge transfer disk-like emitters with fast fluorescence radiation rate and high horizontal dipole orientation for pure blue organic light-emitting diodes

• Multiple CT channels and 3 LE states contribute to the speedy k r and RISC processes. • High Θ and small FWHM are realized due to the rigid disk-like structure. • η r and η out above 30% are achieved owing to triplet exciton utilization and high Θ . • EQE above 10% was realized for the standard blue device based on BO3N. The efficiency of pure blue Organic light-emitting diodes (OLEDs) still needs to be improved, which is limited by the utilization of the forbidden transition triplet excitons and low light-out-coupling efficiency in devices. Herein, two blue emitters were developed through combining multiple diphenylamine (DPA) donors with an oxygen-bridged boron (DBA) or triphenyl triazine (TRZ) acceptor. Notably, a narrow-band deep blue emission with a peak of 423 nm and a Full-width at half-maximum (FWHM) of 34 nm is realized for the boron-based emitter in toluene solution. Thanks to their multiple Charge transfer (CT) channels and high orientated disk-like structure, high radiative transition rates ( k r > 10 8 s −1 ) and high horizontal emitting dipole ratios ( Θ > 80%) can be realized simultaneously. Meanwhile, the introduction of the peripheral DPA units can also provide multiple localized triplet ( 3 LE) states for spin up-conversion of forbidden transition triplet excitons. Owing to the effective up-conversion of triplet excitons and high light-out-coupling efficiency, maximum external quantum efficiency of more than 10% is achieved for the boron emitter-based pure blue OLEDs with a Commission Internationale de l’Eclairage (CIE) coordinates of (0.14, 0.08).