石墨
铜
材料科学
复合材料
润湿
碳化钨
复合数
导电体
钨
基质(化学分析)
电阻率和电导率
冶金
电气工程
工程类
作者
Wenfu Wei,Xiaobo Li,Zefeng Yang,Zhanglin Huang,Haozi Zuo,Qianhua Liao,Wenhan Xie,Guofeng Yin,Guangning Wu
摘要
Graphite matrix/copper composites have found significant potential uses in numerous areas. Until now, a high ambient gas pressure has to be applied to overcome the non-wettability between the copper melt and graphite matrix, which has restricted the technological and economic efficiencies, as well as the composite performance. In this paper, we have proposed a pressureless infiltration strategy to realize the preparation of highly conductive graphite matrix/copper composites. A tungsten carbide network is first in situ constructed in the graphite matrix, transforming the capillary force from the resistance mode to the impetus mode. Results show that the contact angle of graphite/copper decreased from 138.5° to 23° due to the constructed tungsten carbide network. The composites exhibit good interfacial bonding, and the electrical conductivity reaches 15.1 × 105 S/m, far higher than the requirement of the industry standard.
科研通智能强力驱动
Strongly Powered by AbleSci AI