Selective removal of aqueous Hg2+ by magnetic composites sulfur-containing on the hyper-branched surface: Characterization, performance and mechanism

The adsorbents with recyclable, large adsorption capacity and selective adsorption can effectively remove the pollution and harm of heavy metal ions in water. Therefore, two magnetic composites containing sulfur (MCP-S4 and MCP-S8) on the hyper-branched surface were prepared, furthermore, their structures were characterized and adsorption performance was analyzed by FTIR, XRD, TGA, BET, SEM, TEM, VSM and ICP. The results showed that both MCP-S4 and MCP-S8 had superparamagnetism with saturation susceptibility of 22.10 and 22.26 emu/g, and owned a specific surface area of 11.394 and 11.235 m2/g, respectively. MCP-S4 and MCP-S8 could selectively adsorb Hg2+ with the exist of Fe3+, Cu2+, Co2+, Ni2+, Mn2+, and Al3+ in solution. The adsorption kinetics accorded with pseudo-second-order model and Boyd film diffusion model, and the adsorption isotherm was fitted better with Langmuir isotherm model and D-R model, furthermore, the adsorption was an entropic-increasing and endothermic process. The removal rate of Hg2+ from simulated sewage by the two materials was more than 91%, and the adsorption retention rate was more than 85% after five adsorption-desorption cycles. The adsorption mechanism was analyzed by comparing the changes of FTIR, EDS and XPS spectra before and after adsorption. It was found that functional groups (C-N, CONH, CS, SH) could form stable chelates with Hg2+, which was the main reason why MCP-S4 and MCP-S8 could adsorb Hg2+ selectively, furthermore, S atoms of CS and -SH played a leading role in the process of adsorption. In addition, DFT calculation was also used as an auxiliary means to verify the adsorption mechanism.