材料科学
图层(电子)
钙钛矿(结构)
X射线光电子能谱
三碘化物
涂层
化学工程
光电子学
化学
电解质
纳米技术
结晶学
物理化学
色素敏化染料
电极
工程类
作者
Ji‐Eun Jeong,Donghee Kang,Do Hyung Chun,Dongguen Shin,Jae Hyung Park,Sang Wan Cho,Kyu Shik Jeong,Hyunbok Lee,Yeonjin Yi
标识
DOI:10.1016/j.apsusc.2019.07.232
摘要
Direct evidence of chemical interaction and origin of electron accumulation at a “buried” methylammonium lead triiodide (CH3NH3PbI3, hereafter “MAPI”)/TiO2 interface is presented in this study for the first time. Despite the high power conversion efficiency of perovskite solar cells (PSCs) using a TiO2 electron transport layer, the MAPI/TiO2 interface is believed as an electron accumulation position during device operation. To elucidate the cause of the electron accumulation, the energy level alignment at the MAPI/TiO2 interface should be understood. However, a buried MAPI/TiO2 interface forms after a thick MAPI layer deposition; thus, the electronic structure of the MAPI/TiO2 interface cannot be measured using surface-sensitive photoelectron spectroscopy in a conventional stack-up manner. In this study, we investigated the electronic structure of a buried MAPI/TiO2 interface by removing the MAPI and organic layers using solvent immersion. As a result, we reveal that a conduction band minimum (CBM) mismatch occurs owing to the TiOPb bonding on the TiO2 surface. The TiOPb bonds form by the Pb ions penetrating during the spin coating of the MAPI solution. When a [6,6]-phenyl C61 butyric acid methyl ester (PCBM) layer was inserted, the CBM mismatch was removed owing to the high work function of PCBM.
科研通智能强力驱动
Strongly Powered by AbleSci AI