Friction analysis at elastic-plastic contact of rough surfaces using n-point asperity model

The paper describes a theoretical study of friction at elastic-plastic contact of rough surfaces in n-point asperity model framework and based on accurate finite element analysis of elastic-plastic deformation of single asperity contact. Plasticity index, a well-defined nondimensional parameter is used to study the prospective situations arising out of variation in material properties and surface roughness. Using practical values of material properties and surface roughness parameters, results are obtained for the behavior of applied load, friction force, and coefficient of friction as a function plasticity index and mean separation of surfaces. It is observed that with increase in amount of plastic deformation, the load required to be applied for maintaining a particular level of separation between contacting surfaces increases while the frictional force decreases. Coefficient of friction is independent of applied load in predominantly plastic domain of deformation but varies nonlinearly in other domains of deformation. Also, for the same applied load the coefficient of friction increases with increase in elastic deformation.