材料科学
法拉第效率
阴极
钝化
锰
化学工程
涂层
扩散
溶解
锂(药物)
煅烧
氧化物
动力学
复合数
离子
图层(电子)
电解质
电极
复合材料
冶金
化学
催化作用
医学
生物化学
物理
物理化学
工程类
热力学
内分泌学
有机化学
量子力学
作者
Aipeng Zhu,Qin Wang,Yin Zhang,Yueyin Zhang,Xiaogang He,Kaipeng Wu,Hao Wu,Qian Wang,Wenlong Cai,Yun Zhang
标识
DOI:10.1016/j.jechem.2022.04.005
摘要
Li-rich layered oxide of Li1.2Mn0.6Ni0.2O2 (LMNO) with a considerable specific capacity and higher voltage is regarded as a kind of promising cathode material. However, it suffers from transition metal ion dissolution and oxygen escape that leads to rapid capacity decay. In addition, the poor lithium-ion diffusion kinetics gives rise to unsatisfied rate performance. Herein, a stable layer of Li0.5Mn0.5O (LMO) out of LMNO is in-situ constructed through acetic passivation and following calcination process. The generated defect structure in the composite material exhibits fast ion diffusion kinetics and the produced LMO layer can stabilize the substructure, resulting in elevated cycling stability and rate performance. In specific, the [email protected] material exhibits a high initial coulombic efficiency of 80.3% and remarkable capacity retention of 80.7% after 200 cycles at 1 C. Besides, the composite material reveals prominent rate performance that delivers discharge capacities of 158 and 131 mAh g−1 at 5 and 10 C, respectively. At last, this study presents a new approach to optimizing the Li-rich cathode materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI