材料科学
镀铜
光电子学
氮化硅
电镀(地质)
堆栈(抽象数据类型)
太阳能电池
异质结
铜
硅
图层(电子)
纳米技术
冶金
电镀
地质学
程序设计语言
计算机科学
地球物理学
作者
Jian Yu,Liping Zhang,Tao Chen,Jiantao Bian,Jianhua Shi,Fanying Meng,Yuelong Huang,Zhengxin Liu
出处
期刊:Solar RRL
[Wiley]
日期:2019-01-14
卷期号:3 (3)
被引量:13
标识
DOI:10.1002/solr.201800261
摘要
Reducing the production cost of highly efficient silicon heterojunction (SHJ) solar cells is essential for their large‐scale commercialization. Replacing screen printed silver contacts with plated copper is an effective way. However, one needs to deal with the process compatibility without sacrificing the cell performance. In this work, a layer stack of silicon oxide and silicon nitride (SiOx/SiNx) is proposed, serving dual functions of light‐trapping and selective copper plating mask. The SiOx/SiNx stack is prepared by plasma enhanced chemical vapor deposition (PECVD) on a tungsten doped indium oxide (IWO) layer. Optimized SiOx/SiNx/IWO stacks in SHJ solar cells with silver contacts result in excellent anti‐reflection properties and improved external quantum efficiency. A short circuit current density gain of 1.16 mA cm−2 is achieved without the loss in fill factor. This SiOx/SiNx stack is tested as in‐situ deposited selective plating mask for a front‐side copper plating process. An in‐house made light induced plating tool is utilized. A screen printed silver finger is applied as a seed layer for copper plating. The bulk resistivity of Cu/Ag finger reduces to 4.1 E‐6 Ω · cm, which is lower than that of low temperature silver paste (around 6 E‐6 Ω · cm) before copper is plated on it. The dual functions of SiOx/SiNx stack and the process are proven, indicating a good potential for further improving photoelectric properties of SHJ solar cells after well optimization.
科研通智能强力驱动
Strongly Powered by AbleSci AI