偷看
材料科学
立方氧化锆
陶瓷
复合材料
生物医学工程
生物材料
弯曲
流离失所(心理学)
假牙
牙科
植入
纳米技术
医学
外科
心理治疗师
聚合物
心理学
作者
Vincenzo Vertucci,Benedetta Marrelli,Roberta Ruggiero,Mario Iaquinta,Gaetano Marenzi,Gian Marco Parisi,Roberta Gasparro,Andrea Pacifici,Gianfranco Palumbo,Gilberto Sammartino,Marco Tatullo
摘要
Zirconia and polyetheretherketone (PEEK) are two biomaterials widely investigated as substitute for metals in oral prosthetic rehabilitation. To achieve a proper biomechanical behavior, the prosthetic biomaterials must ensure a good resistance to loads, as this is a crucial characteristic enabling their use in dental applications. The aim of this study was to investigate differences in the fracture resistance of different biomaterials in an experimental environment: fixed partial dentures (FPDs) screwed in a prototype of biomimetic mandible. 10 Samples of FPDs were allocated in 2 groups (A and B): Group A (n=5) involved FPDs in zirconia-ceramic, and Group B (n=5) involved FPDs in PEEK-composite. The samples were loaded by means of a three-point bending mechanical test, and the load to fracture has been evaluated generating a point-by-point graphics (speed/load and time/deformation). The samples were further analyzed by micro-computed tomography (micro-CT) and described under experimental loading conditions. Zirconia-ceramic FDPs were the samples reporting the worst results, showing a lower value of vertical displacement with respect to PEEK-based samples. The micro-CT results have further confirmed the preliminary results previously described. This in vitro study aims to give analytic data on the reliability of PEEK as a reliable and strong biomaterial for prosthetic treatments.
科研通智能强力驱动
Strongly Powered by AbleSci AI