化学
肺表面活性物质
临界胶束浓度
亚硫酸氢钠
表面张力
马来酸酐
腰果酚
钠
核化学
傅里叶变换红外光谱
有机化学
色谱法
胶束
共聚物
化学工程
聚合物
生物化学
环氧树脂
物理
量子力学
水溶液
工程类
作者
Hong Chen,Aijun Hao,Baowei Zhu,Jingyu Zhang,Xiao Wu,Lei Yuan
摘要
Abstract Using cardanol polyoxyethylene ether, maleic anhydride, and sodium bisulfite as main raw materials, a new type of surfactant, sodium dicardanol polyoxyethylene sulfosuccinate anionic–nonionic surfactant was synthesized. The effects of reaction temperature, material ratio, and catalyst dosage on esterification reaction were investigated by single factor and orthogonal experiment method, and the reaction conditions of esterification and sulfonation were optimized. Fourier infrared spectroscopy, liquid chromatography‐mass spectrometry and proton nuclear magnetic resonance were employed to determine the target product. The surface tension of obtained sodium dicardanol polyoxyethylene sulfosuccinate γCMC was measured as 34.54 mM/m, and critical micelle concentration was 1.61 × 10−4 mol/L. The surface tension of sodium dicardanol polyoxyethylene sulfosuccinate under different pH and salty environments was further tested, and it was found that sodium dicardanol polyoxyethylene sulfosuccinate showed certain resistance to acid‐base and salt conditions. The cleaning agent for aluminum was prepared using sodium dicardanol polyoxyethylene sulfosuccinate, exhibiting promising performance characterized by its non‐corrosive and environmentally friendly properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI