光电探测器
材料科学
响应度
光电子学
光探测
碳纳米管
异质结
纳米技术
作者
Kangkang Wang,Fei Wang,Yang Cao,Qinyuan Jiang,Aike Xi,Khaixien Leu,Xinnong Wang,Yonglu Zang,Liu Ruina,Rufan Zhang
标识
DOI:10.1002/adfm.202421980
摘要
Abstract Carbon nanotubes (CNTs) are promising candidates for photodetectors due to their excellent electrical and optical properties. However, the strong binding energy of excitons, structural defects, and short lengths of CNTs seriously limited the full utilization of the inherently extraordinary properties of CNTs in photodetector construction. Herein, a new strategy is designed for fabricating high‐performance VIS and NIR photodetectors based on suspended ultralong CNTs‐MoS 2 heterojunction networks. The MoS 2 layers are directly grown on suspended ultralong CNT bundles (s‐UCNTBs). The suspended and defect‐free structures of s‐UCNTBs ensure rapid heat dissipation and perfectly avoid the electron‐phonon interactions from substrates. The interfaces between s‐UCNTBs and MoS 2 effectively improve the generation and transport of photogenerated carriers, thus remarkably enhancing the photodetection performance of s‐UCNTBs‐MoS 2 networks. The s‐UCNTBs‐MoS 2 networks‐based photodetectors exhibit a high responsivity (8.51 A W −1 ), a high detectivity (3.74 × 10 11 cm Hz 1/2 W −1 ), an ultrafast response speed (30 µs/40 µs for response/decay), and a broad detection range (405–1064 nm), far outperforming the most reported carbon materials‐based photodetectors. Moreover, the s‐UCNTBs‐MoS 2 photodetector exhibits good structural and performance stability after being kept in ambient conditions for more than 200 days. This work provides a reliable way to construct high‐performance CNTs‐based devices via structural design.
科研通智能强力驱动
Strongly Powered by AbleSci AI