化学
稀土
稀土元素
动力学
降水
分离(统计)
土(古典元素)
环境化学
矿物学
气象学
统计
数学
数学物理
量子力学
物理
作者
Nofriady Aziz,Agus Sumaryanto,Imam Abdurrosyid,Yogi Priasetyono,Zeni Ulma,Anas Fahmi Imron,Dian Adi Prastowo,Intan Nurhimawati,Sri Wahyuningsih,Siti Aidah,Fajar Muhammad Ramadhan,P. Septian Hardi,Evans Azka Fajrianshah,Juan Carlos Sihotang,Usman Sudjadi,Agus Jamaludin,Yusuf Gigih Wicaksono,Hari Prijanto,Ega Pratama Hadinoto,Alfahrozin
标识
DOI:10.1016/j.jics.2025.102062
摘要
CHEMICAL KINETICS OF RARE EARTH ELEMENT (REE) SEPARATION BY PRECIPITATION METHOD. REE, are difficult to separate due to their similar properties yet are highly useful especially in advanced material industries. REE purification process uses precipitation is conducted to remove unwanted major elements in the material. This study aims to determine the optimum stirring speed and volume of NH 3 (aq) addition, and analyze the order and reaction speed constants in the separation of REE using the precipitation method. The materials used were REOH from monazite sand processing with observed elements is limited to Dy, La, Nd, Ce, and Pr. The precipitation variations used include stirring speed (260–940 rpm) and the addition of NH 3 (aq) volume (10–30 mL). The results showed that the optimum condition of stirring speed for La, Ce, and Pr elements was 500 rpm with efficiency values of 79.51 %, 99.76 %, and 98.89 %, while Dy and Nd elements were 640 rpm with efficiency values of 99.97 % and 99.15 %. The optimum NH 3 (aq) volume addition condition is 20 mL for Dy, Nd, and Ce elements with efficiency values touching 99.99 % on all three elements, while La and Pr elements at a volume of 30 mL with efficiency values of 99.95 % and 99.97 %. The reaction takes place in the first order reaction in all variations. The effect of stirring speed on reaction constants showed that Dy and La had the highest constants at 640 rpm with values of −4.1x10 −6 min −1 and -7.26x10 - 4 min −1 respectively, Nd at 500 rpm with −7.24x10 −5 min −1 , and Ce and Pr at 260 rpm with 1.73x10 −4 and −2.1x10 −5 . The effect of NH 3 (aq) volume addition on the reaction constants showed that Dy had the highest constant at 20 mL with 1.27x10 −6 min −1 , La at 30 mL with −2.07x10 −5 min −1 , and Nd, Pr, and Ce at 25 mL with −1.59x10 −6 min −1 , 3.12x10 −6 min −1 , and 2.37x10 −6 min −1 , respectively.