材料科学
风洞
喷嘴
边界层
涡轮机
压敏涂料
抽吸
后缘
陶瓷基复合材料
定子
层流
陶瓷
前沿
涡轮叶片
机械工程
复合材料
航空航天工程
工程类
作者
Anna Petersen,Benjamin Dimond,Anna-Samira Söhngen,Fabia Süß,Andrea Ebach-Stahl,Ravisankar Naraparaju,Michael Hilfer,Robin G.A. Brakmann
出处
期刊:ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition
日期:2025-06-16
卷期号:: V010T30A012-
被引量:1
标识
DOI:10.1115/gt2025-152853
摘要
In order to fulfill the high flight requirements for a significantly lower environmental impact, new approaches to the design of engines are required. One solution to build an engine as a whole more efficiently is the use of a non-oxide ceramic matrix composite (CMC) based on SiC-fibers in a SiC matrix (SiC/SiC) in the thermally most challenging part of the engine: The high-pressure turbine. The development of SiC/SiC CMCs presents a significant challenge, which we have addressed by producing a high-pressure turbine stator made of SiC/SiC CMC and coated with a newly developed environmental barrier coating (EBC). This advancement has elevated the development level of DLR SiC/SiC CMCs from TRL3 to TRL4. Part of this feasibility study is a test at TRL4 in the Wind Tunnel for Straight Cascades in Göttingen (EGG). The vane performance at different cooling flow ratios is analyzed. The EBC has a low roughness and therefore a nearly complete laminar boundary layer on the suction side with the transition observed near the trailing edge at subsonic flow. The transition location on the suction side was detected using an infrared camera and additionally with time-resolved temperature-sensitive paint (iTSP) at different Mach and Reynolds numbers.
科研通智能强力驱动
Strongly Powered by AbleSci AI