Study on oil seepage mechanisms in lamellar shale by using the lattice Boltzmann method

The shale oil and gas resources in the world are rich and are an important part of unconventional oil and gas resources. In this paper, firstly, by comprehensively using CT scanning technology, the three-dimensional pore-fracture structure characteristics of shale core samples of different sizes is characterized, and a three-dimensional digital core is established; Secondly, SEM and FIB-SEM techniques are systematically used to describe the microstructure and fracture network development characteristics of shale matrix pores and fractures, and a three-dimensional pore and fracture network model is established; Thirdly, Combined with LBZ simulation method, the mechanism of two-phase fluid transport in shale cross-scale fracture network is explored. Results show that: (a) The relatively dispersed mesopores and macropores in space constitute the main storage space of methane. Some pores in the study area of shale samples have good connectivity, and some samples only have connected pores in the study area of their magnification. (b) A large number of intergranular pores and fissures developed together with the intergranular pores of clay minerals, forming a good network connection system between microscopic pores in laminated shale. (c) when the hydrophilic mineral proportion is increased from 30% to 70%, the relative permeability of oil phase at water saturations of 20%, 40% and 60% has an increase of 6.8%, 7.8% and 4.2%, respectively, and the relative permeability of water phase at water saturations of 20%, 40% and 60% has a decrease of 1.8%, 2.6% and 6.5%, respectively. (d) When the oil phase contact angle is increased from 30° to 70°, the relative permeability of oil phase at water saturations of 20%, 40% and 60% has an increase of 1.9%, 2.7% and 2.2%, respectively, and the relative permeability of water phase at water saturations of 20%, 40% and 60% has a decrease of 1.2%, 2.1% and 3.5%, respectively.