The paper discusses the modification of multicomponent polyurethane-polyurea anticorrosive coatings used to protect metal products of complex configuration with epoxy resins based on bisphenols A and F. It has been demonstrated that the addition of 1-10 wt.% epoxy resins to the formulation results in an increase in the hardness of the coatings. At the same time, their elasticity has increased (elongation at break has increased up to 40%) with a negligible increase in ultimate strength (up to 5%). The introduction of epoxy modifiers leads to an increase in the corrosion resistance of the coatings (reducing water absorption, maintaining resistance to cathodic disbondment and the required values of transition resistance when exposed to salt solutions for 30-100 days). When adding epoxy resin, the lifetime of the polyurethane-polyurea composition remains relatively stable with increasing concentration (the increase is no more than 10%). Exceeding the optimum amount of resin may lead to phase separation, which significatly affects the strength of the material. In this case, the relative elongation decreases linearly with an increase in the amount of epoxy modifier. In general, the data collected suggest that the properties of polyurethane-polyurea compositions are highly dependent on the type and concentration of the epoxy resin used. In this work, the choice of the optimal resin concentration at 5 wt.% is based on achieving optimal performance characteristics in accordance with the operational requirements of the coating. Coatings that utilize epoxy resins as a modifier can be recommended for applications where increased requirements are imposed on anti-corrosion protection, such as in main pipelines operated at elevated temperatures and under significant loads. For citation: Latyshev A.V., Bratasyuk N.A., Zuev V.V. Modification of polyurethane-polyurea anti-corrosion coatings with epoxy resins. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2025. V. 68. N 7. P. 138-151. DOI: 10.6060/ivkkt.20256807.7210.