分离器(采油)
材料科学
阳极
电解质
陶瓷
润湿
化学工程
电化学
热稳定性
离子电导率
复合数
聚乙烯
复合材料
电极
化学
工程类
物理化学
物理
热力学
作者
Muchakayala Ravi,Saisrinu Yarramsetti,Pardha Saradhi Maram,Sujith Kalluri,Fen Ran,Sambasivam Sangaraju
标识
DOI:10.1016/j.est.2023.107687
摘要
Herein, we report the Li-ion conducting composite material, Li0.57La0.29TiO3 (LLTO), coated on a microporous polyethylene separator to use in rechargeable Lithium-metal batteries. Since the LLTO contains structural Li-ions and the three-dimensional conducting channels within, it not only improved the ionic conductivity of coated separator but also improved the surface electrolyte wettability and suppressed the dendrite formation. As a result, the Lithium-metal battery cycling stability and safety features are increased. Consequently, the ceramic composite separator enabled a specific capacity of 105.6 mAhg−1 for Li/LiMn2O4 coin cell, and 80 % capacity retention is observed even after 500 cycles at 1C, indicating its promising practical potential application. This work provides a feasible and efficient modification strategy of separators for improving the cycling performance and safety of Lithium-metal batteries. In addition, the ceramic composite-coated separator could instill confidence in using Lithium metal as the attractive anode for high-capacity Li-air and Li‑sulfur batteries with enhanced thermal and cyclic stability.
科研通智能强力驱动
Strongly Powered by AbleSci AI