材料科学
聚酰亚胺
制作
极限抗拉强度
复合材料
基质(水族馆)
软机器人
延伸率
纳米技术
原位
可伸缩电子设备
联锁
变形(气象学)
Kapton
刮擦
拉伸试验
光电子学
电阻率和电导率
薄膜
硅氧烷
柔性电子器件
电容感应
表征(材料科学)
纳米尺度
机器人学
作者
Jialun Yin,Yongjun Kang,Fangzhou Liu,Yifei Tong,Guofeng Tian,Shengli Qi,Dezhen Wu
摘要
ABSTRACT The rapid development of soft robotics and embodied intelligence demands electronic skins (E‐skins) that are both mechanically self‐adaptive and skin‐conformal. However, the rigid aromatic backbones of conventional polyimides limit stretchability and hinder conformal integration with deformable surfaces. Here, elastically stretchable polyimide (es‐PI) films are developed by incorporating aminopropyl‐terminated siloxane spacers, while a confined‐patterned in situ self‐metallization strategy enables direct fabrication of patterned silver circuits. By spatially confining Ag + coordination and reduction within predefined regions, this strategy produces continuous silver nanolayers with well‐defined boundaries and robust metal–polymer interfaces, preserving electrical integrity during repeated deformation. The selected es‐PI‐0.5 substrate exhibits an estimated nominal elongation at break of approximately 96% and a tensile strength of approximately 25 MPa, while the corresponding metallized film retains electrical continuity during tensile deformation up to 50% strain. Device‐level feasibility is demonstrated through a strain‐dependent inductor–capacitor (LC) resonance response measured using a network analyzer and a separate smartphone‐assisted near‐field excitation experiment with rectified direct‐current (DC) output detected using a multimeter. This work establishes a materials–circuit integration approach for stretchable electronic skins and skin‐mounted sensing demonstrations.
科研通智能强力驱动
Strongly Powered by AbleSci AI