铰链
偏转(物理)
执行机构
模块化设计
材料科学
制作
结构工程
机械工程
弹性体
刚度
电介质
弯曲
人工肌肉
顺应机制
工程类
机器人
复合材料
塑性铰链
编码器
联锁
电容器
计算机科学
电缆密封套
扭矩
抗弯刚度
可扩展性
堆积
电极
压电
作者
Andy J. Cohen,Seola Lee,Peisheng He,Qiukai Qi,Robert J. Wood
摘要
Dielectric elastomer actuators (DEAs) offer a promising route to lightweight, compliant, and electrically‐driven actuation for origami‐based robots and deployable/morphable structures. However, their integration into compact active hinges has been limited by fabrication challenges associated with prestretching, electrode exposure, film handling, and multilayer alignment. Here, we report a low‐profile, prestretch‐free DEA active hinge enabled by a scalable vacuum‐assisted laminate assembly process. This manufacturing approach allows thin, stretchable DEA films to be transferred, aligned, and integrated into multilayer hinge architectures while maintaining localized bending deformation and a flat form factor. By controlling the number of active layers, the process provides a direct means to tune electromechanical performance through active‐layer thickness. We model and experimentally explore multilayer DEA hinge performance, finding that five‐layer hinges achieve the maximum quasi‐static peak‐to‐peak deflection of approximately 60 and resonance‐amplified deflection of approximately 260 at 11.5 Hz, whereas seven‐layer hinges provide the highest blocked torque of 15 mN mm and resonate near 18.5 Hz. Finally, the modular assembly of multiple active hinges in a Sarrus linkage converts localized hinge bending into multi‐degree‐of‐freedom motions. These results establish a manufacturable DEA hinge platform for compact, high‐frequency, and modular origami robotic systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI