热点(计算机编程)
定位
光伏系统
二极管
材料科学
热电子
可靠性(半导体)
极限(数学)
光电子学
计算机科学
电子设备和系统的热管理
弦(物理)
功率(物理)
电气工程
电子
工程类
机械工程
物理
数学分析
人工智能
操作系统
量子力学
数学
作者
Katherine A. Kim,Philip T. Krein
标识
DOI:10.1109/jphotov.2015.2444091
摘要
Hot spotting is a reliability problem in photovoltaic (PV) panels where a mismatched cell heats up significantly and degrades panel performance. High temperatures due to hot spotting can damage cell encapsulant and lead to second breakdown; both cause permanent damage to the PV panel. Although bypass diodes are used for protection and qualification tests are used to reduce cell mismatch, these strategies are shown to be insufficient for hot spot prevention. This paper reexamines the hot spot problem in PV strings through simulation and load-line analysis. Results show that cells in typical panel string lengths are susceptible to hot spotting because of reverse bias behavior. A number of existing and emerging solutions aimed at hot spot prevention are discussed and evaluated. Commercially available active bypass switches are an improvement over passive diodes but do not prevent hot spotting. Cells with low breakdown voltages limit power dissipation but are not fully vetted as a long-term solution. A combination of hot spot detection and open-circuit protection is a complete solution to hot spotting.
科研通智能强力驱动
Strongly Powered by AbleSci AI