活塞(光学)
圆柱
活塞环
吸引子
机械工程
工程类
机械
海洋工程
材料科学
戒指(化学)
物理
数学
化学
光学
数学分析
有机化学
波前
作者
Shihui Lang,Hua Zhu,Yao Wang
标识
DOI:10.1108/ilt-05-2024-0179
摘要
Purpose The purpose of this study aims to shorten the running-in time and improve the running-in quality of cylinder liner piston rings (CLPRs), the running-in tests were carried out and running-in parameters of CLPRs were designed based on running-in attractor theory, which can guide the choice of optimal working conditions for other friction pairs. Design/methodology/approach The running-in state and time under different working conditions are identified by the evolution law of the running-in attractor phase trajectory and fractal and chaotic characteristic quantities. The CLPRs running-in tests under different conditions were conducted and the friction signals were collected. The constructed phase trajectories and calculated chaotic parameters of the running-in attractor are obtained and the running-in state and time are identified by the evolution law of phase trajectories and chaotic characteristic quantities. The running-in quality is obtained by the surface morphology fractal dimension and characteristic roughness parameters. Findings The running-in parameters for short running-in time and good running-in quality are designed based on the fractal and chaotic theory and the optimal solution method are used to verify the results through the single objective or multi-objective optimization, and the corresponding optimal running-in parameters are obtained. Originality/value The optimal working condition parameters obtained from the design have guiding significance for the selection of CLPR running-in parameters, and this work can provide ideas for the other friction pairs. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0179/
科研通智能强力驱动
Strongly Powered by AbleSci AI