微观结构
材料科学
复合数
电池(电)
阴极
硫化物
固态
化学工程
纳米技术
复合材料
冶金
工程物理
电气工程
工程类
物理
功率(物理)
量子力学
作者
Finn Frankenberg,Carina Amata Heck,Maximilian Kissel,Martin Lange,Vasiliki Faka,Alexander C. Diener,Peter Haase,Peter Michalowski,Wolfgang G. Zeier,Jürgen Janek,Arno Kwade
出处
期刊:Small
[Wiley]
日期:2025-09-05
卷期号:21 (41): e07279-e07279
被引量:6
标识
DOI:10.1002/smll.202507279
摘要
Abstract While the effects of new solid electrolytes and active materials in cathode composites for solid‐state batteries are being intensively researched, little is known about the influence of mechanical processing on the properties of these composites. Here, the influence of mechanical process parameters on the production of Li 6 PS 5 Cl and LiNi 0.83 Co 0.11 Mn 0.06 O 2 composite cathodes applying a planetary ball milling process is systematically investigated. It is shown that the milling process has a significant influence on the microstructure of the composite by affecting the solid electrolyte particle size and the formation of electrolyte‐active material aggregates. The combination of experimental results with discrete element simulations shows that changes in microstructure with increasing energy input result in an increase in the density of heterocontacts, which improves the electrochemical performance. However, if the energy input is too high, a decrease in the crystallite size of Li 6 PS 5 Cl and an increase in strain in LiNi 0.83 Co 0.11 Mn 0.06 O 2 have a negative impact on the electrochemical performance. Subsequent dry film production of the pre‐milled composites reveals that a non‐optimized composite can be partially compensated by the high shear stresses acting during dry film production. Overall, the paramount importance of precisely controlling the milling process for the production of cathode composites is demonstrated.
科研通智能强力驱动
Strongly Powered by AbleSci AI