成像体模
核医学
医学
探测器
图像分辨率
肺
气道
生物医学工程
材料科学
射线照相术
断层摄影术
计算机断层摄影术
管腔(解剖学)
定量计算机断层扫描
左肺
高分辨率
芯(光纤)
慢性阻塞性肺病
放射科
作者
Natally AlArab,Marrissa J. McIntosh,Junfeng Guo,Jarron Atha,A.S. Kizhakke Puliyakote,Jessica C. Sieren,Eric A. Hoffman,Ehsan Abadi,Sean B. Fain
标识
DOI:10.1088/2057-1976/ae0e27
摘要
Abstract Photon-counting detector (PCD) computed tomography (CT) promises improved resolution and contrast at reduced x-ray dose compared to energy-integrating detector (EID) CT. Our objective is to determine the parameters that achieve robust accuracy of quantitative measures in chest PCD-CT studies compared to quantitative EID-CT at low CT dose. The Kyoto LUNGMAN chest phantom with preserved lung tissue core and NIST-calibrated foam density standards (4–20 lbs.), and the COPD Lung Phantom II with six airways of various outer and inner diameters, were scanned using PCD-CT (NAEOTOM Alpha) and EID-CT (SOMATOM Force) with a target CT dose index (CTDI vol ) of 2.2 mGy to match that specified for ongoing longitudinal quantitative chest CT studies of chronic lung disease. Mean density of foam inserts in the Kyoto phantom and mean lumen area (LA) and wall thickness (WT) of COPD Lung Phantom II were automatically segmented, analyzed, and compared using the root mean squared error (RMSE). Contrast-to-noise (CNR) and signal-to-noise (SNR) ratios were also automatically calculated. Large (11.2 mm) and small (5.5 mm) airway LA and WT in the lung tissue core of the Kyoto phantom were semi-automatically measured. PCD-CT with the Qr40 kernel yielded superior foam density accuracy (RMSE: 6.1–7.8 HU) compared to EID-CT (RMSE: 9.7 HU). Q+UHR mode with Qr64 and a 1024 × 1024 matrix achieved the highest airway accuracy (RMSE <1.8 mm 2 for LA and <0.3 mm for WT). However, these protocols showed increased variability in tracheal air measurements (SD up to ±9 HU), indicating a trade-off between higher spatial resolution and measurement repeatability. At equivalent low radiation dose (2.2 mGy CTDI vol ), PCD-CT outperforms EID-CT in quantitative accuracy for foam density and airway measurements, with comparable SNR and CNR. These results support the use of PCD-CT for quantitative lung imaging in longitudinal studies, provided reconstruction settings are selected to balance accuracy and repeatability.
科研通智能强力驱动
Strongly Powered by AbleSci AI