模具(集成电路)
造型(装饰)
材料科学
压缩成型
机械工程
压缩(物理)
模具
进程窗口
热膨胀
温度测量
有限元法
电子包装
复合材料
过程(计算)
高温计
包对包
热成型
环氧树脂
体积热力学
材料性能
基质(水族馆)
集成电路封装
堆积
炸薯条
结构工程
温度梯度
热的
实验设计
包装工程
芯(光纤)
计算机科学
线条宽度
熔体流动指数
计算流体力学
芯片级封装
航程(航空)
作者
Chang‐Chun Lee,Jui‐Chang Chuang,Huamao Lin,Yan-Yu Liou
摘要
ABSTRACT This study has been focused on die shift mechanism in die-first manufacture process, with a specific focus on the process-induced challenges associated with large area substrate size. The critical process parameters and package stacking geometry factors are considered to estimate the influence on die position. Finite element analysis is utilized to simulate warpage behaviors based on coefficient thermal expansion mismatch between various packaging materials involving substrate, epoxy molding compound (EMC) and die. In addition, computational fluid dynamics has been applied to realize the physical mechanism during compression molding flow process. In addition, EMC material characteristics have been influenced by temperature especially in the modification of volume amount. Consequently, pressure, volume difference, temperature and degree of cure are considered in the measurement of EMC material. In addition, temperature factor has been divided into two conditions involving controlled 150°C temperature and varying temperate range between 50 and 250 °C. The die pattern of a package unit involving multi-dies is simulated and validated with non-contact optical tool. The preliminary result shows that die shift is increased rapidly with the location factor. The amount of die shift is measured smaller than 45 μm. In addition, the deviation of die shifting between the simulation and measurements is <13%. The design of mold cavities is not included in this research. This study provides a method to estimate die shift under various compression molding process of EMC for advanced packaging structures featuring diverse die-first panel level packaging development.
科研通智能强力驱动
Strongly Powered by AbleSci AI