材料科学
退火(玻璃)
复合材料
纳米压痕
软化
方向错误
微观结构
粒度
弹性模量
残余应力
本构方程
有限元法
模数
材料性能
再结晶(地质)
极限抗拉强度
作者
Yiming Hao,Si Chen,Chao L. Li,Ze‐Jian Chen,Fei Qin,Pei Chen,Renjie Tian,Ziyang Li
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2025-11-13
卷期号:18 (22): 5152-5152
被引量:1
摘要
In this study, the stress–strain constitutive models of Cu-Cu joints in hybrid bonding after primary and secondary annealing were determined using nanoindentation experiments and finite element inverse analysis, and the correlation mechanism between the microstructure and macroscopic mechanical properties in hybrid bonding Cu-Cu joints during secondary annealing was revealed. The 350–400 °C secondary annealing facilitates recrystallization–grain growth, increasing grain size from 0.62 μm after primary annealing to 0.71 μm, accompanied by a 12% reduction in kernel average misorientation (KAM) values. This process enhances interface non-planarization and optimizes bonding quality. Concurrently, the secondary annealed Cu-Cu joints exhibit a softening effect, manifested by decreasing trends in elastic modulus (131.02 → 118.98 GPa), hardness (1.78 → 1.51 GPa), and yield strength (70.52 → 56.12 MPa), primarily attributed to the Hall–Petch effect and residual stress release. Notably, the yield strength of secondary annealed Cu-Cu joints demonstrates 31.0% and 68.5% enhancements compared to TSV-Cu (42.83 MPa) and bulk Cu (33.3 MPa), respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI