光电流
钒酸铋
材料科学
标杆管理
光电子学
电极
太阳能转换
能量转换效率
太阳能
光电化学电池
分解水
电流密度
铋
纳米技术
光电化学
功率密度
高效能源利用
工程物理
作者
Christian Robles,Ana Gutiérrez‐Blanco,Laura Montañés,Agustín O. Alvarez,Camilo Arturo Mesa,Francisco Fabregat‐Santiago,Sixto Giménez
标识
DOI:10.1021/acsmeasuresciau.6c00248
摘要
Abstract To enable meaningful comparisons in solar fuel production, the energy conversion efficiency of photoelectrodes must be evaluated using standardized benchmarking protocols. For solar water splitting, the photocurrent density at a defined potential in a three-electrode configuration (e.g., 1.23 V vs. RHE for water oxidation) is widely used. However, this single descriptor is often insufficient for reliable cross-comparison between studies. In many reports, the highest photocurrent densities are obtained under conditions where the entire geometric electrode area (typically several cm2) is illuminated, while only a small fraction (<0.1 cm2) is in contact with the electrolyte. This discrepancy highlights the critical role of the fabricated or illuminated-to-exposed area ratio on the measured performance. In the present study, we systematically investigate the dependence of photocurrent density on the exposed-to-fabricated area ratio of bismuth vanadate (BiVO4) photoanodes prepared using state-of-the-art methods. By combining electrochemical, spectroscopic and structural characterization, we elucidate how this geometric factor governs the apparent photoelectrochemical response. Our results demonstrate that photocurrent metrics are highly sensitive to mismatches between illuminated, fabricated, and electrolyte-exposed areas, underscoring the need for more transparent and standardized reporting protocols to ensure meaningful benchmarking of photoelectrodes across studies.
科研通智能强力驱动
Strongly Powered by AbleSci AI