材料科学
微电子
阳极
制作
硫黄
水溶液
石墨烯
纳米技术
电极
聚合物
聚酰亚胺
电化学
激光器
准分子激光器
电池(电)
硅
化学工程
沉积(地质)
多硫化物
锌
储能
作者
Prahlada Thippeswamy,M. Pope,Debasis Ghosh
出处
期刊:Small
[Wiley]
日期:2026-02-15
卷期号:: e11993-e11993
标识
DOI:10.1002/smll.202511993
摘要
ABSTRACT CO 2 laser–assisted graphitization of high–melting–point polymers, such as polyimide enables customizable patterning for rapid fabrication of microelectronics and miniaturized energy storage devices. Herein, we present the inaugural demonstration of an ultrafast fabrication of a binder‐free flexible in‐plane zinc–sulfur battery with laser‐induced graphene (LIG) supported interdigitated electrodes, i.e., zinc anode and sulfur cathode. We demonstrate a sublimation–transport–desublimation process for trapping and redistributing elemental sulfur onto laser‐induced graphene (LIG) via direct laser treatment, leading to the deposition of plastic/amorphous sulfur. This process enables a uniform sulfur distribution within the LIG matrix and enables covalent bonding with the defect sites of LIG, resulting in a binder‐free, high‐sulfur‐content S@LIG electrode with a sulfur content ∼58 ± 13.8%. The sulfur species during the discharge/charge process were studied via ex situ XRD/XPS analysis. We observed that the shuttling of soluble sulfates, generated from oxidized sulfur during laser treatment, induces parasitic reactions with zinc in aqueous electrolytes, leading to accelerated capacity fading. This issue was mitigated using a gel polymer electrolyte. A semi‐solid‐state, flexible in‐plane Zn–S prototype cell was demonstrated, delivering impressive electrochemical performance with a capacity of 59 µAh cm − 2 , sustained over 80 cycles at a current density of 25 µA/cm 2 .
科研通智能强力驱动
Strongly Powered by AbleSci AI