Modelling the effect of temperature, water activity and pH on the growth of Serpula lacrymans

To predict the risk factors for building infestation by Serpula lacrymans, which is one of the most destructive fungi causing timber decay in buildings.The growth rate was assessed on malt extract agar media at temperatures between 1.5 and 45°C, at water activity (a(w)) over the range of 0.800-0.993 and at pH ranges from 1.5 to 11.0. The radial growth rate (μ) and the lag phase (λ) were estimated from the radial growth kinetics via the plots radius vs time. These parameters were then modelled as a function of the environmental factors tested. Models derived from the cardinal model (CM) were used to fit the experimental data and allowed an estimation of the optimal and limit values for fungal growth. Optimal growth rate occurred at 20°C, at high a(w) level (0.993) and at a pH range between 4.0 and 6.0. The strain effect on the temperature parameters was further evaluated using 14 strains of S. lacrymans. The robustness of the temperature model was validated on data sets measured in two different wood-based media (Quercus robur L. and Picea abies).The two-step procedure of exponential model with latency followed by the CM with inflection gives reliable predictions for the growth conditions of a filamentous fungus in our study. The procedure was validated for the study of abiotic factors on the growth rate of S. lacrymans.This work describes the usefulness of evaluating the effect of physico-chemical factors on fungal growth in predictive building mycology. Consequently, the developed mathematical models for predicting fungal growth on a macroscopic scale can be used as a tool for risk assessment of timber decay in buildings.