等结构
纳米晶材料
材料科学
固溶体
热电效应
热电材料
冶金
结晶学
纳米技术
晶体结构
热力学
化学
复合材料
物理
热导率
作者
H.X. Xin,Xiaoying Qin,Junhong Jia,Chunjun Song,K X Zhang,Jian Zhang
标识
DOI:10.1088/0022-3727/42/16/165403
摘要
Mechanical alloying plus hot-pressing was employed to prepare nanocrystalline (Mg1−xZnx)3Sb2 compounds that were characterized by microstructural examinations and dc electrical resistivity, Seebeck coefficient and thermal conductivity measurements. The results indicated that the grain size of (Mg1−xZnx)3Sb2 compounds is ∼30 nm; the structure and the transport properties can be tuned by isovalent Zn substitution for Mg in the tetrahedral positions for (Mg1−xZnx)3Sb2 from x = 0 to ∼0.6. It can be almost 90% concentration by replacing some of the Mg atoms in the tetrahedral position with Zn atoms in (Mg1−xZnx)3Sb2. The distance between Mg–Sb decreases with increasing zinc content in (Mg1−xZnx)3Sb2. The angle θ of Mg–Sb–Mg in the tetrahedral sites for (Mg1−xZnx)3Sb2 changes non-monotonically with x. The electric transport behaviour changes because the Coulomb repulsion increases between Mg/Zn and Mg/Zn atoms in the tetrahedral position with the closer contact. The thermoelectric power factor (α2/ρ) of (Mg1−xZnx)3Sb2 for x = 0.55 (at 300 K) is more than 5 × 102 times larger than that of Mg3Sb2. Moreover, due to its extremely low thermal conductivity (∼1.08 W m−1 K−1), the dimensionless figure of merit, ZT, of (Mg1−xZnx)3Sb2 with x = 0.32 is found to be over 80 times larger than that of Mg3Sb2 at 300 K.
科研通智能强力驱动
Strongly Powered by AbleSci AI