Stability Dynamic Characteristic of Oil-in-Water Emulsion from Alkali–Surfactant–Polymer Flooding

High Resolution Image Download MS PowerPoint Slide The relationship model between the droplet lifetime and interface properties is established to characterize the stability of oil droplets, and then, the influence of the alkali–surfactant–polymer (ASP) concentration on the lifetime is analyzed by theoretical calculations. The stability dynamic characteristics of oil-in-water (O/W) emulsions from ASP flooding were evaluated using the emulsion stability model (Civan model) based on two-phase separation. The effect of ASP on dynamic characteristics of the emulsion was explored by analyzing film strength qualitatively and measuring interfacial tension and ζ potential. The results showed that the Civan model was suitable to evaluate the stability of the O/W emulsion and to obtain the corresponding dynamic characteristics. The O/W emulsions became more stable with the increasing alkali concentration first at a low alkali concentration ( c NaOH < 200 mg/L) and then became less stable with the increasing alkali concentration at a high alkali concentration ( c NaOH > 200 mg/L). The stabilities of O/W emulsions were improved with the increasing concentrations of the surfactant and polymer. The mechanism of stabilization of the O/W emulsion by ASP is as follows. The surface-active substances formed by the reaction of alkali and acidic substances in the oil phase, together with surfactants, adsorb at the oil–water interface, reducing the interfacial tension and increasing the strength of the oil–water interface film. The polymer only increases the strength of the interface film by increasing the viscoelasticity of the oil–water interface film.