Multifunctional Molecularly Imprinted Receptor-Based Polymeric Membrane Potentiometric Sensor for Sensitive Detection of Bisphenol A

Molecularly imprinted polymer (MIP)-based polymeric membrane potentiometric sensors have become an attractive tool for detection of organic species. However, the MIP receptors in potentiometric sensors developed so far are usually prepared by only using single functional monomers. This may lead to low affinities of the MIP receptors due to the lack of diversity of the functional groups, thus resulting in low detection sensitivity of the potentiometric sensors. Additionally, these classical MIP receptors are nonconductive polymers, which are undesirable for the fabrication of an electrochemical sensor. Herein, we describe a novel multifunctional MIP receptor-based potentiometric sensor. The multifunctional MIP receptor is prepared by using two functional monomers, methacrylic acid, and 3-vinylaniline with a dual functionality of both recognition and conduction properties. The poly(aniline) groups are introduced into the methacrylic acid-based MIP by postoxidation of the aniline monomer. Such poly(aniline) groups not only serve as the additional functional groups for selective recognition, but also work as a conducting polymer. The obtained multifunctional MIP receptor shows a high binding capacity and an excellent electron-transfer ability. By using bisphenol A as a model, the proposed multifunctional MIP sensor exhibits a largely improved sensitivity and low noise levels compared to the conventional MIP sensor. We believe that the proposed MIP-based sensing strategy provides a general and facile way to fabricate sensitive and selective MIP-based electrochemical sensors.