材料科学
缩进
摩擦学
分子动力学
位错
复合材料
软化
纳米压痕
变形(气象学)
热的
参数统计
基质(水族馆)
法向力
摩擦系数
热膨胀
方位(导航)
接触面积
摩擦系数
嵌入原子模型
曲面(拓扑)
干润滑剂
压痕硬度
磨损
雷亚克夫
工作(物理)
严重塑性变形
机械
作者
Jinyao Tang,Dongwei Wang,Jian Guo,Peng Wang,Chao Jiang,Changwen Yao,Qiang Deng
标识
DOI:10.1080/08927022.2026.2722233
摘要
Au coatings are widely used in electrical contacts because of their high conductivity, chemical stability, and low contact resistance. However, repeated insertion, fretting, and high local stresses can cause wear and subsurface damage. Molecular dynamics simulations with an Au spherical tip sliding on an Au (100) single-crystal substrate were used to investigate the effects of normal load, sliding speed, and temperature on friction and damage evolution. Increasing normal load raises the tangential force but reduces the steady-state coefficient of friction (COF) and its coefficient of variation (COV), while increasing indentation depth, wear atoms, and front and side pile-up. Increasing sliding speed reduces the COF, COV, numbers of wear and hexagonal close-packed (HCP) atoms, and total dislocation length, indicating less accumulated and retained damage. Temperature has a nonmonotonic effect: friction decreases from 250 to 350 K because of thermally activated relaxation, whereas thermal softening and atomic migration at 400 K cause deeper indentation and more severe damage. Plastic deformation is dominated by 1/6⟨112⟩ Shockley partial dislocation glide and associated stacking-fault/HCP evolution. These findings connect frictional behavior with atomistic defect evolution and provide guidance for improving the reliability of Au-coated electrical contacts.
科研通智能强力驱动
Strongly Powered by AbleSci AI