纳米纤维
表征(材料科学)
兴奋剂
材料科学
纳米技术
化学工程
光电子学
工程类
作者
Wei Tang,Jing Wang,Pengjun Yao,Haiying Du,Yanhui Sun
标识
DOI:10.3866/pku.whxb201402191
摘要
SnO2 nanofibers were fabricated by electrospinning, using SnCl2∙2H2O as the raw material. The influences of ZnO doping on the morphologies, structures, and compositions of the SnO2 nanofibers were studied by introducing different amounts of ZnO into the SnO2. The crystallography and microstructures of the synthesized SnO2/ZnO composite nanofibers with different molar ratios of Sn to Zn were investigated using thermogravimetric/differential thermal analysis (TG-DTA), X-ray diffraction (XRD), Fouriertransform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) spectroscopy. The obtained SnO2/ZnO composite nanofibers with different ZnO contents had hollow hierarchical structures composed of nanocrystals. Different amounts of ZnO gave different structures. The characterization results showed that the introduction of ZnO into SnO2 played an important role in the SnO2 nanofiber structure. The gas sensing properties of sensors based on different ZnO-doped SnO2 nanofibers were tested. The results indicated that the methanol-sensing performance of the sensor containing SnO2/ZnO in a molar ratio of 1:1 was better than those of the others. The sensing mechanisms of ZnO-doped SnO2 nanofibers were examined in detail. Possible reasons for the enhanced 781 Acta Phys. -Chim. Sin. 2014 Vol.30
科研通智能强力驱动
Strongly Powered by AbleSci AI