材料科学
波形
下降(电信)
喷墨打印
体积热力学
喷嘴
佩多:嘘
牛顿流体
压电
墨水池
纳米技术
复合材料
电压
机械工程
机械
电气工程
聚合物
工程类
物理
量子力学
作者
H. Y. Gan,Xuechuan Shan,T Eriksson,Boon Keng Lok,Yee Cheong Lam
标识
DOI:10.1088/0960-1317/19/5/055010
摘要
Inkjet printing has proven to be a promising and flexible process methodology for low cost and drop-on-demand pattern formation in small-scale production of micro-electro-mechanical systems. To optimize the micro-patterns formed by inkjet printing, an accurate control of droplet volume is essential and critical. In this study, an inkjet system with a nozzle driven by a circular piezoelectric element was used to explore the impact of different waveforms on droplet volume. The investigation into this study included the impact of unipolar, bipolar, M-shaped and W-shaped waveforms as well as the effects of their amplitudes and pulse durations. The inkjetting behavior of Newtonian and non-Newtonian fluids under different actuating waveforms was studied in order to obtain a maximum reduction in ejected droplet sizes. An effective reduction of droplet volume in the range of 50–80% was demonstrated. The results of inkjetting PEDOT ink on a polished silicon surface showed that a 50% reduction in line width was achieved.
科研通智能强力驱动
Strongly Powered by AbleSci AI