符号
探测器
分析化学(期刊)
物理
材料科学
数学
化学
光学
有机化学
算术
作者
Yingying Hao,Fangpei Li,Ruichen Bai,Xin Zhang,Qihao Sun,Jie Wang,Xu Ye
标识
DOI:10.1109/ted.2022.3215098
摘要
CsPbBr3 (CPB) single crystal has exhibited remarkable photoelectric properties and great potential for radiation detection. However, the applications are still challenging for the limited bulk resistivity and the chemical reactivity of electrode contacts. A metal–insulator–semiconductor structure of In/LiF/CPB is employed to modify the contact characteristics. By introducing a LiF interlayer, the interface trap density of detector is tuned to as low as $2.80\times 10^{{8}}$ cm $^{-{2}}\cdot $ eV−1, compared to $2.42\times 10^{{9}}$ cm $^{-{2}}\cdot $ eV−1 of In/CPB/Au detector, which is attributed to the block of diffusion and reaction between metal and crystal. The barrier height of In/LiF/CPB/Au device is increased to 0.66 eV and the leakage current falls to 85.7 nA $\cdot $ cm−2 under an electrical field of 1000 $\text{V}\cdot $ cm−1. The In/LiF/CPB/Au device exhibits superior photoresponse ON/OFF ratio and energy resolutions of $\alpha $ -particles (241Am at 5.48 MeV) and $\gamma $ -rays (241Am at 59.5 keV and 137Cs at 662 keV) than the In/CPB/Au device, suggesting that the introduction of LiF interlayer is a simple yet effective method to improve the performances of CPB Schottky junction radiation detector.
科研通智能强力驱动
Strongly Powered by AbleSci AI