材料科学
霞石
吸水率
烧结
抗压强度
尾矿
空隙(复合材料)
复合材料
颗粒
堆积密度
冶金
矿物学
环境科学
化学
土壤科学
土壤水分
作者
Jun Jiang,Song Chen,Chao Jin,Gui Wang,Shipeng Li,Tianyuan Xu,Luo Lei,Wenjing Dang,Xu Yang,Tao Ding,Zhengyin Li,Zhongyuan Lu,Jun Li
标识
DOI:10.1016/j.conbuildmat.2023.130458
摘要
Nepheline tailings (NTs) were made into pellets and then transformed to lightweight aggregate ceramsites by sintering approach, the effects of mix composition and sintering process on air-void structure and performance were studied. The results show that introducing mineralizer, rising sintering temperature and extending holding time increased air-void size, decreased density, reduced cylinder compressive strength and rose water absorption of NT-based ceramsite. Acceleration of heating rate led to the increase of density, resulting in strength enhancement, but heating rate of 20 ℃/min caused uneven air-voids, weakening strength. Dense enamel layer on surface, suitable air-void structure and well-crystallized nepheline of ceramsite contributed to preparation of high-strength lightweight ceramsite with a NT content of 93 % to 97 %, bulk density of 577 kg/m3 to 823 kg/m3, cylinder compressive strength of 4.3 MPa to 9.3 MPa and a low water absorption of 0.3 % to 0.8%
科研通智能强力驱动
Strongly Powered by AbleSci AI