Photo-electrocatalytic based removal of acetaminophen: Application of visible light driven heterojunction based BiVO4/BiOI photoanode

The presence of organic micro-pollutants (OMPs) in wastewater treatment effluents is becoming a major threat to the water safety for aquatic and human health. Photo-electrocatalytic based advanced oxidation process (AOP) is one of the emerging and effective techniques to degrade OMPs through oxidative mechanism. This study investigated the application of heterojunction based BiVO4/BiOI photoanode for acetaminophen (40 μg L-1) removal in demineralized water. Photoanodes were fabricated by electrodeposition of BiVO4 and BiOI photocatalytic layers. Optical (UV-vis diffusive reflectance spectroscopy), structural (XRD, SEM, EDX) and opto-electronic (IPCE) characterization confirmed the successful formation of heterojunction for enhanced charge separation efficiency. The heterojunction photoanode showed incident photon to current conversion efficiency of 16% (λmax = 390 nm) at an external voltage of 1 V under AM 1.5 standard illumination. The application of the BiVO4/BiOI photoanode in the removal of acetaminophen at 1 V (external bias) vs Ag/AgCl under simulated sunlight showed 87% removal efficiency within the first 120 min compared to 66% removal efficiency of the BiVO4 photoanode. Similarly, combining BiVO4 and BiOI exhibited 57% increase in first order removal rate coefficient compared to BiVO4. The photoanodes also showed moderate stability and reusability by showing 26% decrease in overall degradation efficiency after three cycles of each 5 h experiment. The results obtained in this study can be considered as a stepping stone towards the effective removal of acetaminophen as an OMP present in wastewater.