电容感应
极地的
电容器
近似误差
控制理论(社会学)
数学
数学分析
物理
电压
计算机科学
工程类
电气工程
控制(管理)
天文
人工智能
作者
Minghui Pu,Jinhao Zhang,Yao Qi-hong,Baocheng Cai,Zhaoyang Luo
标识
DOI:10.1109/jsen.2023.3242070
摘要
For capacitive sensors, the initial polar distance of capacitors has a vital influence on the performances of capacitive sensors; however, there are few current studies on the method of calculating the initial polar distance of capacitors, leading to a lack of corresponding theoretical basis for the design of capacitive sensors. In this article, a calculation method for the optimal initial polar distance based on minimum error is proposed. The total error expression is derived from error analysis, which clarifies the complex relationship between the total error and the initial polar distance, and the optimal initial polar distance is solved by Newton’s method. A capacitive torque sensor is used in the experiment to verify the calculation method for the optimal initial polar distance, the theoretical error and experimental error of the sensor are compared, and the results show that the experimental error is consistent with the theoretical error curve. The optimal initial polar distance obtained by the calculation method is 0.8479 mm, which is within the range of 0.8–0.9 mm determined by the experiment. The theoretical minimum total error is 0.211% and the experimental minimum total error is 0.208%. The total error expression proposed in this article is accurate, and the calculation method of the initial polar distance is effective. In addition, theoretical analysis reveals that the differential parallel plate capacitor has the characteristic that any small deformation of the moving plate can be equivalent to a translation whose magnitude is the mean value of the deformation.
科研通智能强力驱动
Strongly Powered by AbleSci AI