Effects of chemical and natural ageing on the release of potentially toxic metal additives in commercial PVC microplastics

Various chemical substances, such as potentially toxic trace metals, are used as plastic additives to improve the performance of polymers and extend the service life of plastic products. However, these added trace metals are likely released from plastic into the environment when the plastic becomes a pollutant, although the process is poorly understood. In this study, chemical ageing of commercial polyvinyl chloride (PVC) microplastics using hydrogen peroxide (H2O2) and natural ageing of PVC that had been added to an alkaline paddy soil were undertaken to evaluate the potential release of trace metals from PVC. Enhanced release of trace metals from PVC with the increasing H2O2 concentrations was observed, in which the released Pb was 1–2 orders of magnitude higher than other metals (p < 0.01). The released Cr, Ni, Pb, Cu, Zn, Cd and Mn accounted for 87.37%, 79.27%, 22.02%, 20.93%, 17.06%, 15.11%, and 11.02% of their total concentrations (0.28 ± 0.03, 0.08 ± 0.01, 13.67 ± 0.18, 1.07 ± 0.02, 2.20 ± 0.18, 0.05 ± 0.00 and 1.26 ± 0.08 mmol kg−1) in PVC after ageing with 30% H2O2, respectively. Compared with the control treatment without PVC addition, the concentrations of CaCl2-extractable Cu, Mn, Ni, Pb, and Zn in the soil treated with 5% PVC are significantly increased after incubation for 60 days (p < 0.01). In conclusion, chemical and natural ageing have the potential to lead to the release of Cu, Mn, Ni, Pb, and Zn from the commercial PVC into aquatic and terrestrial environments.