材料科学
原子层沉积
钼
等离子体
金属
图层(电子)
分析化学(期刊)
沉积(地质)
变化(天文学)
冶金
纳米技术
化学工程
环境化学
化学
古生物学
工程类
物理
生物
量子力学
天体物理学
沉积物
作者
Taewaen Lim,Hyo Sik Chang
标识
DOI:10.3740/mrsk.2019.29.11.715
摘要
Molybdenum is a low-resistivity transition metal that can be applied to silicon devices using Si-metal electrode structures and thin film solar cell electrodes. We investigate the deposition of metal Mo thin film by plasma-enhanced atomic layer deposition (PE-ALD). Mo(CO)6 and H2 plasma are used as precursor. H2 plasma is induced between ALD cycles for reduction of Mo(CO)6 and Mo film is deposited on Si substrate at 300 °C. Through variation of PE-ALD conditions such as precursor pulse time, plasma pulse time and plasma power, we find that these conditions result in low resistivity. The resistivity is affected by Mo pulse time. We can find the reason through analyzing XPS data according to Mo pulse time. The thickness uniformity is affected by plasma power. The lowest resistivity is 176 μΩ·cm at Mo(CO)6 pulse time 3s. The thickness uniformity of metal Mo thin film deposited by PE-ALD shows a value of less than 3% below the plasma power of 200 W.
科研通智能强力驱动
Strongly Powered by AbleSci AI