材料科学
电磁屏蔽
导电体
电磁干扰
电磁干扰
数码产品
热导率
热的
光电子学
电磁兼容性
保温
可穿戴技术
兴奋剂
电压
复合材料
多孔性
可穿戴计算机
柔性电子器件
热传导
散热片
干扰(通信)
电阻率和电导率
电导率
制作
作者
Baoxin Fan,Kang Fu,Cheng Xie,Junye Liao,Junzhe Shang,Liyan Xie,Zidong He,Tong Wu,Guoxiu Tong
摘要
Flexible wearable electronics in the 5G/6G era require multifunctional fabrics integrating electromagnetic interference (EMI) shielding, sensing, electro‐thermal conversion, and thermal insulation, yet these properties are inherently incompatible. Herein, we modified the surface of a 2D network in non‐woven fabric (NWF) by doping Cl– into PPy (NWF‐P‐X) through a simple controllable layer‐by‐layer immersing–polymerization process. The introduction of Cl – ‐doped PPy shell constructed conductive networks within 2D NWF matrices, resulting in boosted electrical conductivity ( σ ) (65.13 S/m), electro‐thermal conversion efficiency, and pressure‐responsive sensing performance. The high σ endowed the NWF‐P‐X with great wide‐frequency absorption‐dominated EMI shielding effectiveness (EMI SE). The SET was beyond 25 dB (99.68377% shielding capacity) over 30 MHz–4.5 GHz and beyond 40 dB (99.99% shielding) over 8.0–40.0 GHz. The NWF‐P‐X also presented a rapid heat response under a low voltage (4.0 V) and a wide temperature range (29.6°C–107.4°C). Moreover, the NWF‐P‐X exhibited superior thermal insulation performance with low thermal conductivity (0.5537 W∙m −1 ∙K −1 in‐plane; 0.0650 W∙m −1 ∙K −1 out‐of‐plane), where the porous structure and phase interfaces critically enable multifunctional compatibility for EMI protection, thermal management, and sensing applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI