材料科学
锰
延展性(地球科学)
脆性
极限抗拉强度
冶金
硅
马氏体
碳纤维
转变温度
复合材料
微观结构
蠕动
复合数
物理
量子力学
超导电性
作者
D. Terentyev,A. Puype,O. Kachko,W. Van Renterghem,J. Henry
标识
DOI:10.1016/j.nme.2021.101070
摘要
In this work, we investigate an alternative route for the production of reduced activation ferritic-martensitic (RAFM) steels with reduced contents of manganese and carbon. Alternation of the chemical composition coupled with various heat treatments as well as quench & rolling procedures are applied in an attempt to reduce the DBTT without altering the nominal strength and ductility. The obtained experimental results on the mechanical properties and microstructural analysis are compared to the reference European RAFM steel i.e. Eurofer97. It is demonstrated that an alternation of the conventional heat treatment of the newly developed low Mn/C steel allows the production of a material with a ductile to brittle transition temperature as low as -133 degrees C and strength comparable to that of Eurofer97. On the other hand, the performed quench & rolling procedure does not lead to any noticeable reduction of the DBTT, albeit it significantly increases the tensile strength without compromising the ductility in the relevant operational temperature range.
科研通智能强力驱动
Strongly Powered by AbleSci AI