文石
海水
镁
材料科学
碳酸钙
过饱和度
化学工程
结晶
蒸发器
海水淡化
人工海水
蒸发
冶金
化学
复合材料
地质学
膜
热力学
有机化学
工程类
物理
海洋学
热交换器
生物化学
作者
Kerstin Krömer,Stefan Will,Katell Loisel,Stephan Nied,Jürgen Detering,A. Kempter,Heike Glade
标识
DOI:10.1080/01457632.2015.954961
摘要
Scale formation on heat transfer surfaces is one of the most severe problems in multiple-effect distillers for seawater desalination. A horizontal tube falling film evaporator in pilot-plant scale was used to study crystallization fouling under conditions close to those prevailing in industrial multiple-effect distillers. Experiments were performed with artificial seawater and model solutions based on artificial seawater under various process conditions. In experiments with artificial seawater, the surface of copper–nickel 90/10 tubes was covered with a two-layer scale comprising a thin, flaky magnesium-rich and calcium-free base layer underneath a thick layer of calcium carbonate crystals in the form of aragonite. Analyses indicated Mg(OH)2 (brucite) and iowaite in the thin base layer. The magnesium-rich scale layer was formed even at a low evaporation temperature of 50°C, which promotes the assumption of locally high pH values at the metal-solution interface. A shift of pH to high values in the thin seawater film due to CO2 release and, additionally, cathodic reactions may promote a high degree of supersaturation of Mg(OH)2. Once the tube surface is completely covered with the thin Mg-rich scale layer, it seems that the growth of the Mg-rich layer ceases and aragonite crystals start to precipitate. A decrease in the Mg2+ ion concentration in the solution results in an increase in the mass of calcium carbonate as aragonite in the scale layer. Results suggest that Mg2+ ions retard the calcium carbonate crystallization.
科研通智能强力驱动
Strongly Powered by AbleSci AI