微塑料
流出物
废水
污水处理
环境科学
水生环境
制浆造纸工业
润滑油
环境工程
废物管理
人口
环境化学
化学
生物
生态学
工程类
社会学
人口学
生物化学
作者
Fionn Murphy,Ciaran Ewins,Frederic Carbonnier,Brian Quinn
标识
DOI:10.1021/acs.est.5b05416
摘要
Municipal effluent discharged from wastewater treatment works (WwTW) is suspected to be a significant contributor of microplastics (MP) to the environment as many personal care products contain plastic microbeads. A secondary WwTW (population equivalent 650 000) was sampled for microplastics at different stages of the treatment process to ascertain at what stage in the treatment process the MP are being removed. The influent contained on average 15.70 (±5.23) MP·L(-1). This was reduced to 0.25 (±0.04) MP·L(-1) in the final effluent, a decrease of 98.41%. Despite this large reduction we calculate that this WwTW is releasing 65 million microplastics into the receiving water every day. A significant proportion of the microplastic accumulated in and was removed during the grease removal stage (19.67 (±4.51) MP/2.5 g), it was only in the grease that the much publicised microbeads were found. This study shows that despite the efficient removal rates of MP achieved by this modern treatment plant when dealing with such a large volume of effluent even a modest amount of microplastics being released per liter of effluent could result in significant amounts of microplastics entering the environment. This is the first study to describe in detail the fate of microplastics during the wastewater treatment process.
科研通智能强力驱动
Strongly Powered by AbleSci AI