材料科学
选择性激光熔化
小旋翼机
多孔性
复合材料
模数
弹性模量
形态学(生物学)
产量(工程)
最小曲面
抗压强度
几何学
微观结构
共聚物
数学
遗传学
聚合物
生物
作者
Changrong Chen,Jianfei Ma,Yamin Liu,Guofu Lian,Xiaoxiao Chen,Xu Huang
标识
DOI:10.1016/j.mtcomm.2023.105853
摘要
Triply periodic minimal surface (TPMS) structures are ideal for applications such as lightweight and bone implantation. Compared with uniform structures, functionally graded cellular materials (FGCMs) are more attractive due to their diverse performance and excellent adaptability to actual requirements. A series of uniform cellular structures including Primitive and Gyroid type are designed and manufactured by selective laser melting (SLM) to understand the morphology, geometry characteristics as well as mechanical properties. Then, the transversely and longitudinally graded cellular structures are proposed to understand its relation to uniform cellular structures. The results show that the actual porosity of cellular structures is slightly lower than the designed, with a small deviation of 2.2%− 3.7%. The elastic modulus and yield strength of uniform cellular structures decrease gradually with increase of porosity. The mechanical properties of uniform cellular structures relative to solid counterparts can be predicted from Gibson-Ashby equations. The porosity gradient TPMS structures are found the mechanical accumulation of uniform cellular substructures. The mechanical properties of gradient TPMS structures can be modelled by composite theories.
科研通智能强力驱动
Strongly Powered by AbleSci AI