Investigation of the wave–photovoltaic-battery​ hybrid power generation platform’s control strategy

This paper proposes a wave–photovoltaic-battery hybrid power generation platform which based on the distributed DC collection and AC inverter grid structure. To be able to simplify the control structure of the power generation system and improve the anti-interference ability of the system, a one-step delay compensation model predictive current control (MPCC) method is proposed for the wave power generation rectifier unit and the perturbation and observation (P&O) fuzzy logic maximum power point tracking (MPPT) algorithm is applied in the photovoltaic power generation unit. Meanwhile, the constant power control method is used to realize the charge and discharge control of the energy storage system to achieve the grid-connected goal of tracking the load power demand. Finally, the MATLAB/Simulink software is applied to simulate the grid-connected operation characteristics of the wave energy power generation unit in continuous power generation modes, as well as the photovoltaic power generation unit at constant temperature and variable irradiance. The results illustrate that the suggested technique for controlling the power generating unit is straightforward and feasible, DC bus voltage stability effect is effective, and the inverter output satisfies the grid-connected operating requirement, which verifies the feasibility of the proposed scheme and can provide some theoretical support for the subsequent high-capacity wave–photovoltaic-battery hybrid power generation platform.