The efficiency of enhanced nitrogen and phosphorus removal in a vertical flow constructed wetland using alkaline modified corn cobs as a carbon source

Adding carbon sources to constructed wetlands can improve nitrogen removal efficiency. Modifying plant biomass can solve problems such as excessive release of nitrogen, phosphorus, and organic matter in the initial stage and insufficient carbon supply in the later stage. This article utilized alkali-modified corn cob as a carbon source to construct vertical flow constructed wetlands and to study the carbon release characteristics of alkali-modified corn cob, as well as its removal effect on organic matter in wastewater. The results indicated that the solid-to-liquid ratio in the alkali modification process of corn cob was 1:10, and it was found that the best treatment method for alkali modified corn cob was to use a sodium hydroxide concentration of 2%, a treatment time of 12 h, and a temperature of 20 °C. Its surface roughness increases, which is beneficial for releasing carbon sources and promoting the growth of microbial attachment. Furthermore, the porosity also increases and. Intermittent aeration could significantly enhance the removal of NH4+-N, and TP in constructed wetlands. The average removal rates of NH4+-N and TP were 60.93% and 89.50%, respectively, and the average removal rates of COD, NO3--N and TN were 60.67%, 98.38% and 83.73%, respectively. At the same time, alkali-modified corn cobs were used as carbon sources. It can effectively remove NO3--N and promote denitrification in constructed wetlands.