田口方法
灰色关联分析
材料科学
压力降
热的
下降(电信)
机械工程
电子设备和系统的热管理
优化设计
MOSFET
正交数组
散热片
结温
纵横比(航空)
水冷
计算机冷却
频道(广播)
复合材料
有限元法
热膨胀
工作温度
压缩比
实验设计
平方(代数)
热导率
拓扑优化
最高温度
总压比
雷诺数
响应面法
作者
Tianshi Zhang,Wenkai Zhao,Xiaoxia Sun,Haizhen Huang,Haibo Chen,Tonghe Zhang
摘要
Abstract SiC MOSFETs (Silicon Carbide Metal-Oxide-Semiconductor Field-Effect Transistors) of electric vehicles under high-load operating conditions suffer from severe thermal management challenges. In this study, different structural parameters were combined by the Taguchi method, selecting the average junction temperature of the SiC MOSFETs (Tavg), the coefficient of temperature variation (CVt), and pressure drop (ΔP) as optimization objectives. The influence degree of different structural parameters on optimization objectives was analyzed by signal-to-noise ratio (SNR). Owing to its foundation in a single-objective framework, the Taguchi method is constrained in addressing multi-objective optimization. This study transformed three optimization objectives into gray relational grades (GRGs) for thermal management performance optimization through gray relational analysis. The first optimization revealed the number of channels contributed most significantly to Tavg, the channel angle most strongly influenced, and the channel height was the primary determinant of ΔP. Furthermore, through the second optimization, the width ratio was determined to be the greatest effect on Tavg and CVt, while the contraction ratio with the greatest effect on ΔP. The optimized bionic liquid cooling plate reduced Tavg by up to 15%, CVt by up to 10%, and ΔP by up to 37.6%. This research provides a prospective insight into the thermal management of SiC MOSFETs under high-load operating conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI