材料科学
极限抗拉强度
聚乙烯醇
复合材料
溶解
异氰酸酯
表面改性
溶剂
聚乙烯
接触角
聚合物
制作
湿强度
聚乙二醇
机械强度
热稳定性
耐化学性
食品包装
艾氏冲击强度试验
聚碳酸酯
化学工程
水分
水蒸气
拉伸试验
聚氯乙烯
高分子化学
弹性体
乙二醇
六亚甲基二异氰酸酯
作者
Gasim Sebit Ahmed Suleiman,Xu Zeng,Yakai Feng
摘要
Despite extensive research on alternatives to petroleum‐based materials, developing polyvinyl alcohol (PVA)‐based films that simultaneously exhibit high hydrophobicity and mechanical robustness remains a persistent challenge. In this study, we propose a straightforward surface modification strategy to fabricate PVA‐based packaging film with enhanced mechanical strength in a watery environment. The approach employs imidazole‐blocked hexamethylene diisocyanate (BHDI) in ethyl laurate, a food‐grade, non‐toxic solvent that swells PVA film without dissolving it. Unlike conventional crosslinking strategies that rely on toxic aldehydes or strong organic solvents, this method enables uniform, controlled surface crosslinking via thermally activated deblocking. The regenerated isocyanate then reacts with surface hydroxyl groups through nucleophilic addition without compromising processing safety. The resulting crosslinked PVA‐BHDI films displayed a water contact angle (WCA) of 102° at room temperature. The PVA‐BHDI 5 film demonstrated a tensile strength of 80.1 ± 0.33 MPa under dry condition. The film retained a tensile strength of 36.2 ± 0.20 MPa after 24 h immersion in water at ambient temperature, similar to that of polyethylene (PE) in its dry state. Remarkably, the films maintained their hydrophobicity and structural integrity, showing no signs of dissolution or fracture even after 4 h of immersion in 95°C hot water. In addition, the crosslinked films showed improved moisture barrier and UV‐blocking capabilities. This study presents the first demonstration of a safe, solvent‐assisted, surface‐targeted BHDI crosslinking system for PVA, enabling high hydrophobicity, wet‐state mechanical strength, and thermal water resistance for potential use as plastic bags and packaging.
科研通智能强力驱动
Strongly Powered by AbleSci AI