光催化
材料科学
石墨氮化碳
煅烧
氮化碳
制氢
分解水
氢
碳纤维
氮化物
带隙
可见光谱
化学工程
半导体
纳米技术
催化作用
光电子学
化学
复合材料
有机化学
图层(电子)
工程类
复合数
作者
Mohammad Reza Gholipour,Francois Béland,Trong‐On Do
标识
DOI:10.1021/acssuschemeng.6b01282
摘要
Hydrogen production via photocatalytic water splitting using sunlight has enormous potential to solve the worldwide energy and environmental crisis. The key challenge in this process is to develop efficient photocatalysts which must satisfy several criteria such as strong sunlight absorption, effective charge separation, and high photochemical stability. Graphitic carbon nitride is one of the best semiconductors for hydrogen evolution because of its conduction band edge, narrow band gap, and high chemical stability. However, it produces a small amount of hydrogen under visible light irradiation due to its small surface area and high recombination rates. In this work, nanosheets of graphitic carbon nitride with carbon vacancies and nanoholes were synthesized by a two-step treatment process (argon treatment followed by air calcination). These post-calcined carbon nitride nanosheets exhibited much higher photocatalytic activity compared to common graphitic carbon nitride. By depositing platinum as a cocatalyst via a photodeposition method, this semiconductor showed noticeable improvement in hydrogen production rate at 10 times that of graphitic carbon nitride. Its hydrogen evolution rate was 5261 μmol h –1 g –1 under visible light illumination with a quantum efficiency of 29.2% at 400 nm and 21.3% at 420 nm. This high amount of hydrogen production rate could be due to large specific surface area, an extension of visible light absorption tail-end, and lower charge recombination centers throughout the semiconductor. In addition, by a recalcination step in air, some defects are introduced into the structure of carbon nitride nanosheets owing to carbon vacancies. These defects are considered to be highly active photocatalytic sites for hydrogen production.
科研通智能强力驱动
Strongly Powered by AbleSci AI